|
| |
The EXIKATOR is an easy medium to survey your production of MAP packages in
periodic intervals for possible leaks in film and seams. Ready packs are placed
into the water bath, the touch-down lid presses the pack into the testing level,
and the closed EXIKATOR will be evacuated.
By reducing the air pressure in the EXIKATOR the pack blows up. In case of
leaks in film or seams bubbles raise up from the defect spot. The testing
pressure can be pre-selected and adjusted.
After the non-destructive test faultless packages can be regularly commercialized.
NEW ! EXIKATOR small
 |
Small, handy table device
round container made of acrylic sheet (PMMA) with detachable lid
measurement: Ø 375 x 260 mm height
air connection via plug-in-coupling
generation of negative pressure via injector |
EXIKATOR large - well-proven
Housing made of acrylic sheet (PMMA) with touch-down lid from
stainless steel. A water collector is integrated in the lid.
Leaktester, vacuum pump and control device are mounted as a unit on a
stainless steel table with wheels for flexible use.
| internal size |
620 x 350 x 300 mm |
| external size |
890 x 600 x 1200 mm |
| vacuum pump |
Busch, 21 m3/h,
vacuum connection to cover lid |
| control |
contact vacuum gauge to define low pressure |
| voltage |
230 V |
| Option:
insert for defined sealing link pressure test |
| Made in Germany |
|
 |
|
