|
| |
- slant roof of the electrical cabinet
- swivel-mounted designer control panel
- Siemens S 7 SPS - controller; simple software replacing by exchangeable
memory cards
- standard components from renowned suppliers are freely available, e.g.
FESTO, Siemens
- integrated cooling system, no water connection, no water consumption
- gas mixer integrated; gassing system optional qualified for concentrated
oxygen
- possible prolongation module in loading area: 800 mm
- safety covers after forming die with protection fingers: thus larger
loading area
- powered height-adjustable supporting plate in loading area (to ease
loading of numerous pieces per pack)
- possible prolongation modules in outfeed area: 800, 1400, 1900 mm and
combinations
 
yoke sealing plate system: simple and quick exchange of sealing
frames without any tool
- changing of dies: quick and easy by insertable dividing webs and sealing
frames
- setting of lifting height via control panel
- manual, quick-acting cycle split adjustment
- 2 speeds for longitudinal cutting: thus applicable for flexible and
semi-rigid film
- hinged safety covers in longitudinal- and cross-cutting area:
thus exchanging of cutter shafts without physical endeavour
- guillotine cuts with simple exchange of knife-sets: (zig-zag, serrated or
perforation cutting)
- combi - punch with simple change from semi-rigid packages with round
corners to flexible packages
- active carbon filter, thus forming air of prime quality (ISO-DIN standard)
to prolong shelflife of product
- plane and smoothly removable side panels
- slant roof of electrical cabinet - no laying yard
- prepared for additional devices (e.g. filling systems, oil- and brine
filler, package separators, package separators, package coding systems
(stamp printer, hot printer, thermotransfer printer for direct film prints,
labelling systems)
- short delivery times
- complementary we deliver a stainless steel shelf for storing dies and
accessories
| film width |
320, 355, 400, 420 mm |
| stroke |
max. 480 mm, (300 mm in case of preheating) |
| forming depths |
max. 120 mm |
| bottom film roll |
max. 400 mm Ø with 3"/6" - core |
| top film roll |
max. 320 mm Ø with 3"/6" - core |
| advance speed |
continuously adjustable |
| micro processor control |
Siemens S7, LCD-display, user-friendly, 99 programs, different
languages |
| vacuum pump |
up to 100 m3/h integrated, external any size |
| pneumatic |
Festo |
| cooling system |
integrated, no water consumption |
| voltage |
3 x 230 / 400 V / N / PE, 50 / 60 Hz. |
| compressed air |
min 6 bar |
Machines correspond to GMP - standard. Subject to technical alterations.
Made in Germany
|
